Kenwood NX-5200/5300/5400

P25 or NXDN™, the choice is yours.

The NX-5000 Series supports 2 digital CAIs — P25 (Phases 1 & 2) and NXDN™ – plus FM analog in a single radio. Unsurpassed interoperability is in your hands.

Freedom to migrate at your own pace

A desired CAI can be selected at will – whether you are intent on going fully digital, undecided about which digital system to pick, or just wanting to maintain both digital and analog for a while.

P25 Phase 1&2 Digital CAI

P25 is a digital CAI to ensure interoperability among public safety agencies. The NX-5000 Series is compatible with Phase 1 (conventional and trunked), and Phase 2 (trunked).

NXDN™ Digital CAI

NXDN™ is a very narrowband protocol employing 6.25/12.5 KHz FDMA technology. NXDN™ offers a variety of advantages including spectrum efficiency and stability, scalability, flexible channelization, and wider coverage area.

Automatic Call Identification

An NX-5000 Series radio automatically identifies a call signal – whether it’s P25, NXDN™, or FM analog – and transmits in the same mode received.

Enhanced Mixed Operation

Enhanced Mixed Zone allows any digital CAI and/or FM analog to reside in the same zone. Zone scan automatically sets all users in the same zone in the same RX/TX mode.

Two configurations to choose from

Choose between two portable configurations – one without a numeric keypad and the other with numeric keypad (16-key model). Both styles feature the 4-way Directional-pad (D-pad) and 2-position lever switch.

Full-color, 1.74-inch color LCD

A 1.74-inch (240 x 180 pixel) 65,536-color Transflective LCD, capable of displaying a multi-line text and colored icons, can be viewed clearly in direct sunlight or in the dark, even while wearing polarized sunglasses.

Clear Communications Even in Noisy Environments DSP

In addition to sophisticated sound analysis and optimization technologies, these radios feature Active Noise Cancelling based on leading-edge digital technology to offer clear communications even in very noisy environments.

MIL-STD Environment and Ingress Protection Standards MIL-810 IPX8 IPX5

During the development stage, NX-5000 Series radios go through a number of stringent tests as shown below. As a result, the portable radios complying with IP67/68 immersion standards offer max. 2-hour protection at a depth of 1 meter*, while the mobile radios comply with IP54/55 dust/water ingress protection standards.

*Applies for IP68

• Multi-Digital + FM Analog Operation
  • NXDN™ Conventional
  • NXDN™ Type C Trunked
  • P25 Phase 1 Conventional/Trunked
  • P25 Phase 2 Trunked
  • FM Analog Conventional/Trunked
• Color 1.74″ (240 x 180 pixel) Transflective TFT Display
• Color GUI and Multi-line Text Display
• 1,000 mW Speaker Audio (@8 Ω, 5% distortion)
• 4-way Directional-pad (D-pad) and 2-Position Lever Switch
• 6 Front & 2 Side PF keys
• 12-Key Keypad Models Available
• Emergency / AUX Key
• MDC-1200
• FleetSync®/II
• Maximum of 4,000 CH/Radio capacity, 512 CH/Zone, 128 Zones
• MPT Options